Directly supplying Chilean shipyards, naval integrators, port authorities, and high-altitude industrial plants with certified power conversion hardware and defense-grade tactical modules.
Ruggedized stab-proof protective vest engineered for maritime security personnel, naval patrol crews, and port safety operations.
Fast 2s signal analysis, multi-frequency RF power amplifier system for coastal surveillance, shipboard defense, and perimeter protection.
High-efficiency Gallium Nitride (GaN) broadband power amplifier for marine communications and counter-FPV electronic defense systems.
Flexible power dual-mode defense system supporting DJI O4 protocol detection, optimized for mobile marine and tactical field units.
Precision multi-band microwave power amplifier engineered for radar interference suppression and naval communications conditioning.
Digital display status monitor, Type-C rapid charging, zoomable beam optics, and waterproof housing for extreme field inspections.
UB-MK-1200 series high-gain power module supporting 1160-1260MHz protection for vessel bridge electronics and coastal defense towers.
High-power 428-438MHz defense module featuring heavy-duty thermal sinking and customized continuous-duty power conversion.
Maintaining uninterrupted clean electrical power on oceanic vessels, commercial cargo ships, naval frigates, and offshore platforms requires specialized topologies far superior to standard commercial office UPS units.
Operating a marine vessel along Chile’s extensive 6,435 km Pacific coastline exposes onboard electronics to severe electrical stress, harmonics, high humidity, airborne salinity, and intense mechanical vibration. A true CE Certified Marine UPS acts as an isolation barrier between chaotic generator power and mission-critical navigation, sonar, telecommunications, and automated vessel control suites.
Converts incoming AC shipboard power to DC intermediate bus, then reconstructs pure sinusoidal AC output. Eliminates 100% of voltage sags, spikes, line noise, frequency instability, and harmonic distortion with zero transfer time (<0ms switching).
Integrated heavy-duty isolation transformers prevent stray ground currents, hull corrosion loops, and common-mode electrical noise from corrupting sensitive sonar transducer arrays, bridge navigation displays, and satellite terminals.
All internal printed circuit boards (PCBs) feature dual-layer acrylic or silicone conformal coatings resistant to salt-fog corrosion. Internal magnetics are structurally reinforced against shock (MIL-S-901D standards) and shipboard engine vibration.
While Chile relies on the Superintendencia de Electricidad y Combustibles (SEC) for domestic grid equipment certification, maritime, naval, and international trade infrastructure in major Chilean ports (such as Valparaíso, San Antonio, Iquique, and Talcahuano) mandate rigorous adherence to international standards. CE certification guarantees compliance with safety directive LVD 2014/35/EU (EN 62040-1) and electromagnetic compatibility EMC 2014/30/EU (EN 62040-2 Category C2/C3).
This ensures that our high-power marine UPS platforms and defense power supplies generate zero radio-frequency interference (RFI) that could blind VHF radios, AIS transponders, or GPS navigation receivers aboard Chilean naval vessels and commercial transport ships.
From the arid, high-altitude mining heights of the Atacama Desert to the sub-Antarctic waters of Patagonia, our marine and industrial power systems are custom-engineered for Chile’s extreme geography.
Continuous 60Hz / 400Hz power regulation for shipboard bridge electronics, container terminal crane telemetry, and Chilean Navy zonal electrical distribution cabinets.
De-rated thermal power supplies and IP66 sealed DC-DC converters operating reliably at elevations exceeding 4,000 meters above sea level with heavy ambient dust protection.
Wide-temperature battery heating management systems and shock-resistant chassis engineered for oceanographic research vessels and Magellan Strait icebreakers.
Rust-proof IP67 sealed AC-DC power converters providing uninterrupted energy to automated salmon feeding systems, water monitoring sensors, and hybrid microgrids.
As Chile solidifies its status as South America's primary logistics hub and clean energy pioneer, demand for high-reliability, certified electrical infrastructure continues to surge.
Chile's national mandate to become a global exporter of Green Hydrogen by 2030 requires robust UPS power backup systems for electrolysis plants and port loading facilities in Antofagasta and Magallanes.
The Chilean Navy’s shipbuilding initiative (ASMAR shipyard builds) demands COTS (Commercial Off-The-Shelf) power converters and UPS units tested against rigorous MIL-STD-1399 and MIL-STD-461 specifications.
Copper mines converting heavy haul trucks to hybrid/electric drive trains rely on heavy-duty DC-DC converters and rugged power supplies capable of handling massive back-EMF spikes and dust storms.
Review the parameters that differentiate our CE certified export platforms from standard commercial electrical products.
| Performance Standard | Standard Commercial UPS | AJPS CE Certified Marine UPS | Chile Industrial Advantage |
|---|---|---|---|
| Harmonic Distortion (THD) | < 5% THD (Non-isolated) | < 2% Pure Sine Wave (Isolated) | Protects sensitive shipboard radar, sonar & PLC controllers. |
| Operating Altitude | 0 m to 1,000 m (Rapid derating) | Up to 4,500 m Altitude Ready | Fully operational in Atacama mining sites without thermal trip. |
| Ingress Protection | IP20 / IP30 (Open Vented) | IP65 / IP67 Sealed & Potted Options | Resists intense Pacific salt-spray, moisture, and fine copper dust. |
| EMC / RFI Certification | EN 55032 Class A | CE EN 62040-2 / MIL-STD-461 Compliance | Zero radio frequency interference with bridge VHF and satellite communications. |
| Shock & Vibration | IEC 60068-2-6 Light Commercial | MIL-STD-810 / MIL-S-901 Marine Grade | Withstands severe engine vibration and heavy Pacific swell impact. |
| Input Frequency Flexibility | 50Hz or 60Hz Fixed | 45Hz – 65Hz / 400Hz Auto-Sensing | Seamlessly bridges 50Hz Chilean shore power with 60Hz/400Hz vessel grids. |
With over 35 years of dedicated power conversion engineering (CAGE Code 0P327), AJ's Power Source Inc. delivers uncompromised reliability across global military, naval, and high-demand commercial markets.
Rather than forcing standard catalog items into complex marine or industrial envelopes, our team specializes in Modified Commercial Off-The-Shelf (MOTS) builds. We modify output voltage rails, hold-up times, connector types, mechanical mounting, and conformal coatings to meet your exact project specifications without charging exorbitant Non-Recurring Engineering (NRE) fees.
Manufacturing under an accredited ISO 9001 quality system registered through Perry Johnson Registrars (PJR) with ANAB accreditation, every unit undergoes 100% full-load burn-in testing, thermal cycling, and high-voltage insulation verification prior to export packaging.
Addressing key logistics, technical compliance, and environmental considerations for importing marine UPS systems into Chile.
Yes. In Chile, while consumer electrical goods require SEC certification, industrial, marine, and defense equipment imported for shipboard or industrial use widely recognize European Union CE Certification (EN 62040-1/2, LVD & EMC directives) as the international gold standard for electrical safety and electromagnetic compliance. We supply full technical dossiers and CE Declarations of Conformity to streamline customs clearance in Valparaíso, San Antonio, or Iquique.
Chilean onshore power operates at 220V/50Hz, whereas many international commercial ships, naval vessels, and offshore platforms utilize 60Hz or 400Hz internal distribution grids. Our online double-conversion marine UPS systems feature wide-input frequency auto-sensing (45Hz – 65Hz) and built-in frequency synthesis, allowing seamless conversion from 50Hz Chilean shore power to a rock-solid 60Hz continuous output.
Standard UPS power supplies lose cooling efficiency at high elevations due to lower air density. For Chilean mining operations in the Atacama region (e.g., Calama, Antofagasta), we engineer custom heat sink geometries, utilize high-CFM variable-speed fans, and select higher temperature-rated components to maintain 100% nominal power rating up to 4,500 meters altitude without thermal derating.
For vessels operating in the Magellan Strait, Tierra del Fuego, or Antarctic routes out of Punta Arenas, sub-zero ambient temperatures dramatically reduce lead-acid and lithium battery capacity. We integrate temperature-compensated battery charging circuitry and optional internal thermal heating pads within insulated IP65 battery cabinets to preserve full reserve backup runtime.
Absolutely. We frequently replace standard IEC or terminal block power connections with heavy-duty circular MIL-DTL-38999 or IP67 quick-disconnect connectors. This prevents cable strain under severe shipboard vibration and ensures water-tight seals against salt-water washdown.
Standard modified-COTS platforms feature lead times of 4 to 8 weeks depending on custom features. We offer door-to-port maritime ocean freight to Valparaíso / San Antonio, as well as expedited air freight directly to Santiago (SCL - Arturo Merino Benítez International Airport) with complete export logistics support.
Yes. Every power platform manufactured by AJPS is supported by our 15-year Form-Fit-Function obsolescence guarantee. If an internal component reaches end-of-life, our engineering team designs direct drop-in replacement assemblies so your long-term Chilean infrastructure requires no physical cabinet redesign.
Simply click the Contact Us button on this page to open a live chat session with our application engineers, or submit your electrical power specification envelope, input/output voltage requirements, and target environmental standards directly through our inquiry portal.
Contact our specialized power engineering team today to review your project envelope, request mechanical 3D CAD files, or receive a formal export quotation for Chile and LATAM destinations.
